 TRUCK
CHASSIS ALIGNMENT
|
NAVIGATION
HOME PAGE
CONTACT US
E-MAIL US
|
| BEE LINE is built tough and
versatile to handle all makes of the heaviest trucks, trailers and buses. |
Beeline’s design
makes corrections without causing additional damage to the vehicle and without heat. The
Vehicle retains its original tensile strength.
The backbone of the machine is the frame press to
which all tie-downs, holds, pushes and pulls are connected.
Power is applied with a hand-held fingertip control
which allows for individual or multiple application of the necessary amount of pressure to
correct the damage without overbending. |
|
|
|
Whether correcting
side sway, sag, twist, or diamond, the frame press and tools are adjusted so all slack is
removed before hydraulic corrections start. These unique features make it possible for the
vehicle’s wheels to stay put when correction is made.
Beeline is designed so that the pressure is
applied to the damage at the precise position needed to remove the bends or twists, and
does it without heat! |
| The BEE LINE System The Bee Line Chassis alignment jig is one of the most modern and reliable of
its type available on the market today. Using 20 ton hydraulic rams, it will re-align
damaged chassis without the use of any heat, ensuring that the original tensile strength
is retained. |
1. Chassis bent |
2. Straightening procedure in operation |
3. Chassis back in alignment |
| PRESS Commercial Bodyworks
SMOKE LANE, AVONMOUTH, BRISTOL, BS11
0YA
Tel: 0117 9821166 Fax:0117 9384134 E-mail: info@presscommercials.co.uk |
COMMERCIAL
BODYWORKS